Currently the developers are putting their own money into JC2-MP to keep the servers online.

Please take a few seconds of your time and disable your AdBlock plugin for our website.

Ad revenue is not going to developers, it is used purely for covering our hosting costs.


You are also free to donate, which removes all ads from our website!

Patch 0.3 was just released! Full changelog here:

3 years ago

May 25, 2020, 05:33:05 am

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - m1cr0man

Pages: [1]
Hi all

I've had a joystick and steering wheel sitting on my desk for a while now, using them for games like IL-2 and DiRT, but my recent addiction to Just Cause 2 has made them a little dusty. I decided to look into getting them to work on JC2 with analogue support and working buttons.

Step-By-Step Instructions
1. Get x360ce (just from here:
2. Put the .exe in the archive into your Just Cause 2 (<steam folder>\steamapps\common\just cause 2) folder and run it.
3. A number of dialogues will open. Skim through them hitting yes/next, nothing else. None of it mattters at the moment.
4. You will now see 4 controller tabs at the top of the window, at least one should have a red/green box in its title. Click on whichever one is the game controller you want to use for Just Cause.
5. You should now see and Xbox Controller. Press/turn/twist/roll your game controller.
   - If you see green crosshairs or dots appearing or moving on the controller where you want them to (eg steering axis moves left thumb) skip to step 8
   - If nothing happens, keep reading
6. Clear all the preset controls by selecting "clear" from the drop down box at the bottom of the screen and then clicking "load".
7. For each axis/button on your controller that you want to use you must assign it to the corresponding axis/button on the xbox controller. I'll explain how with an example:
   - Click the first drop down box, which is Left Trigger, and click [Record]
   - Move the part of your controller you want to assign it to. The box will be filled with that axis/button, and it's opposite may be automatically filled in to Right Trigger.
Repeat this for every axis/button you want to set up. You can also select the axis/button manually from the drop down box instead of hitting [Record] if you know what you're doing.
8. Go to the "Advanced" tab. Here you can tweak the dead zones for each corresponding trigger/thumb on the xbox controller. For steering wheels, I suggest 10% Dead Zone on both triggers, 2%-5% dead zone on the Left Thumb and 80% AntiDeadZone.
You can check out the "Force Feedback" tab too. If its already enabled, it will work, but otherwise it probably won't even if you set the values up yourself.
9. Click Save at the bottom right of the window, exit, and launch Just Cause 2 as you normally would. You will hear your windows beep sound, it is just x360ce telling you its working.
10. Have fun with your controller. :D You can use up to 4 controllers and the keyboard at any one time!

For example purposes (or if you have one), I have attached the config for my Thrustmaster RGT Force Feedback Pro Steering Wheel. Put it in your Just Cause folder to use.

1. x360ce.exe crashes on launch.
   - Neutralise all axis on your controller(s) and/or
   - Run the program in compatibility mode for XP Service Pack 3

Feel free to ask if you have any other problems.

Pages: [1]